| Material | Process | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Accura AMX Rigid Black | 3D Systems | Acryl | SLA | 51 MPa/55 MPa | 2000 MPa/2300 MPa | 11 %/26 % | - | ||
| IND403 | LOCTITE 3D | Acryl | DLP | 67 MPa | 2572 MPa | 10 % | 72 MPa | ||
| Ultrasint PA11 | Forward AM | PA | SLS | 45 MPa/54 MPa | 1110 MPa/1750 MPa | 24 %/45 % | - | ||
| TPU 92A | Stratasys | TPU | FDM | 16.8 MPa/20.7 MPa | 15300 MPa/20700 MPa | 482 %/552 % | 15.6 MPa/16.1 MPa | ||
| Aluminium AlSi10Mg | EOS | Alu | SLM | 310 MPa/460 MPa | - | 4 %/11 MPa | 230 MPa/268 MPa | ||
| ToughONE™ | Stratasys | Acryl | POLYJET | - | 2433 MPa/2873 MPa | 24 %/55 % | 40 MPa/62 MPa | ||
| SIL 30 | Carbon | Silicone | DLS | 3 MPa | 1 MPa | 350 % | - | ||
| TrueSil A60 | Spectroplast | Silicone | DLP | 8 MPa | 2 MPa | 400 % | - | ||
| Tough 1500 Resin V2 | Formlabs | Acryl | SLA | 30 MPa/34 MPa | 1250 MPa/1460 MPa | 155 %/210 % | 30 MPa/34 MPa | ||
| PLA Tough+ | Bambu | PLA | FDM | 20.9 MPa/34.9 MPa | 1860 MPa/1920 MPa | 9.3 %/9.4 % | - | ||
| DURAPRO ASA GF | Extrudr | ASA | FDM | 60 MPa | - | 5 % | - | ||
| PLA Matte | Bambu | PLA | FDM | 22 MPa/30 MPa | 1670 MPa/1960 MPa | 4.8 %/14.8 % | - | ||
| PLA Basic | Bambu | PLA | FDM | 31 MPa/35 MPa | 2060 MPa/2580 MPa | 7.5 %/12.2 % | - | ||
| PLA-CF | Bambu | PLA | FDM | 26 MPa/38 MPa | 2160 MPa/2790 MPa | 3.6 %/8.4 % | - | ||
| PPS-CF | Bambu | PPS | FDM | 24 MPa/87 MPa | 2850 MPa/8230 MPa | 0.7 %/1.2 % | - | ||
| PK5000 | LumaSint | PK | SLS | 51 MPa/53 MPa | 1305 MPa/1349 MPa | 21 %/51 % | - | ||
| EPU 41 | Carbon | PU | DLS | 15 MPa | 8 MPa | 300 % | - | ||
| ULTEM™ 9085 Resin | Stratasys | PEI | FDM | 39.4 MPa/73.9 MPa | 1930 MPa/2520 MPa | 1.9 %/8.7 % | 48.7 MPa/78.7 MPa | ||
| Monkey TPU 50 | Powder Monkeys | TPU | SLS | 3.5 MPa/5.5 MPa | - | 250 %/450 % | - | ||
| EPU 40 | Carbon | PU | DLS | 19 MPa | 8 MPa | 400 % | - | ||
| Ultrasint® PA11 Black CF | forward am | PA | SLS | 48 MPa/82 MPa | 2000 MPa/5900 MPa | 7 %/11 % | - | ||
| PC Blend Jet Black | Prusa | PC | FDM | - | 1900 MPa/2000 MPa | - | 63 MPa | ||
| TPU 85A | Bambu | TPU | FDM | 10.5 MPa/12 MPa | 5.2 MPa/6.8 MPa | 350 %/700 % | - | ||
| FS3200PA | Farsoon | PA | SLS | 48.1 MPa | 1646 MPa | 38 % | - | ||
| PA 950HD | EOS | PA | SLS | 41 MPa/44 MPa | 1670 MPa/1750 MPa | 6.1 %/13.1 % | - | ||
| TPU 90A | Formlabs | TPU | SLS | 7.2 MPa/8.7 MPa | - | 110 %/310 % | - | ||
| Ultrasint PA6 MF Black | forward am | PA | SLS | 40 MPa/91 MPa | 3100 MPa/6250 MPa | 0.9 %/7 % | - | ||
| Rolaserit PBT01 | AM-Polymers | PBT | SLS | 45 MPa/49 MPa | 2450 MPa/2650 MPa | 4.5 %/15 % | - | ||
| Tough 2000 Resin V2 | Formlabs | Acryl | SLA | 26.1 MPa/40.4 MPa | 1235 MPa/1800 MPa | 79 %/149 % | 26.1 MPa/40.4 MPa | ||
| Filaflex 60A | Recreus | TPU | FDM | 26 MPa | - | 950 % | - | ||
| Tough 1000 Resin | Formlabs | Acryl | SLA | 23.7 MPa/26.3 MPa | 844 MPa/932 MPa | 180 %/217 % | 18.6 MPa/21.4 MPa | ||
| Flexible 80A Resin V2 | Formlabs Inc. | TPU | SLA | 10 MPa | - | 230 % | - | ||
| Clear Resin V4.1 | Formlabs | Acryl | SLA | 53 MPa | 2369 MPa | 9 % | - | ||
| PEKK 100 | ALM - Advanced Laser Materials | PEKK | SLS | 60 MPa/81 MPa | 3900 MPa/4000 MPa | 1.6 %/2.3 % | - | ||
| DuraForm HST Composite | 3D Systems | PA | SLS | 49.5 MPa | 5475 MPa | 4.5 % | - | ||
| DuraForm Flex | 3D Systems | TPU | SLS | 1.8 MPa | 7.4 MPa | 110 % | - | ||
| Nylon 12 GF | Formlabs | PA | SLS | 38 MPa | 2800 MPa | 3 %/4 % | - | ||
| Nylon 11 | Formlabs | PA | SLS | 49 MPa | 1600 MPa | 40 % (X/Y) | - | ||
| DuraPro ASA | Extrudr | ASA | FDM | 62.2 MPa | 2200 MPa | 20 % | - | ||
| PAHT-CF | Bambu | PA | FDM | 47 MPa/92 MPa | 2180 MPa/3860 MPa | 4.1 %/8.4 % | - | ||
| Nylon 11 CF | Formlabs | PA | SLS | 38 MPa/69 MPa | 1600 MPa/5300 MPa | 5 %/15 % | - | ||
| DuraForm PA11 Black | 3D Systems | PA | SLS | 51 MPa (XY) | 1900 MPa (XY) | 52.6 % (XY) | 51 MPa (XY) | ||
| Somos NeXt | Stratasys | Acryl | SLA | 32.8 MPa | 2430 MPa | 9 % | 42.2 MPa | ||
| DuraPro ABS | Extrudr | ABS | FDM | 49 MPa | 2350 MPa | 5 % | - | ||
| DuraPro ABS CF | Extrudr | ABS | FDM | 49 MPa | 2350 MPa | 10 % | - | ||
| DuraPro ASA CF | Extrudr | ASA | FDM | 49 MPa | 2500 MPa | - | - | ||
| PLA BASIC CF | extrudr | PLA | FDM | 53 MPa | 500 MPa | 6 % | - | ||
| XPETG CF | Extrudr | PETG | FDM | 59 MPa | 3350 MPa | 9.4 % | 59 MPa | ||
| FLEX HARD CF | Extrudr | TPU | FDM | - | 35 MPa | - | - | ||
| LOCTITE 3D IND475 | Loctite | Elastomer | DLP | 3.1 MPa | 1.1 MPa | 201 % | - | ||
| LOCTITE® 3D 8195™ | Loctite | Acryl | DLP | 3.28 MPa | 3.55 MPa | 81.3 % | - | ||
| ABS-M30 | Stratasys | ABS | FDM | 26.8 MPa/28.1 MPa | 2300 MPa/2400 MPa | 1.8 %/8.1 % | 27.5 MPa/30.8 MPa | ||
| HP 3D High Reusability PA 12 FR | HP | PA | MJF | 46 MPa/46 MPa | 2540 MPa/2580 MPa | 4 %/4.7 % | - | ||
| HP 3D High Reusability PA 11 Gen2 | HP | PA | MJF | 52 MPa/52 MPa | 1740 MPa/1800 MPa | 20 %/25 % | - | ||
| HP 3D High Reusability PA 12 S | HP | PA | MJF | 43 MPa/45 MPa | 1700 MPa/1700 MPa | 5 %/12 % | - | ||
| FS3300PA-F | Farsoon | PA | SLS | 46 MPa | 1602 MPa | 36 % | - | ||
| ASA-X | CR-3D | ASA | FDM | 43 MPa | 2500 MPa | 49 % | - | ||
| Nylon 12 | Formlabs | PA | SLS | 50 MPa | 1850 MPa | 6 %/11 % | - | ||
| Nylon 12 Tough | Formlabs | PA | SLS | 42 MPa | 1450 MPa | 15 %/25 % | - | ||
| Nylon 12 White | Formlabs | PA | SLS | 47 MPa | 1950 MPa | 6 %/8 % | - | ||
| Grey Resin V4.1 | Formlabs | Acryl | SLA | 47 MPa | 2200 MPa | 10 % | - | ||
| White Resin V4.1 | Formlabs | Acryl | SLA | 53 MPa | 2367 MPa | 7 % | - | ||
| PA12 Smooth | Sinterit | PA | SLS | 38.44 MPa/42.3 MPa | 1572 MPa/1662 MPa | 4.55 %/4.91 % | - | ||
| Clear Resin V5 | Formlabs | Acryl | SLA | 51 MPa/60 MPa | 2575 MPa/2750 MPa | 8 %/10 % | - | ||
| PA 11 Onyx | Sinterit | PA | SLS | 55 MPa (X) | 1680 MPa (X) | 31.6 % (X) | - | ||
| LOCTITE 3D IND402 | Loctite | Elastomer | DLP | 5.5 MPa | 42 MPa | 230 MPa | - | ||
| ULTEM™ 1010 Resin | Stratasys | PEI | FDM | 28.2 MPa/91.6 MPa | 2640 MPa/3040 MPa | 1.1 %/4.2 % | 35.3 MPa/92.8 MPa | ||
| HP 3D HR PA 12 | HP | PA | MJF | 50 MPa/54 MPa | 1900 MPa/2150 MPa | 9 %/18 % | - | ||
| PPS-CF | CR-3D | PPS | FDM | 100 MPa | 8000 MPa | 1.7 % | - | ||
| Rigid 10K Resin | Formlabs | Acryl | SLA | 53 MPa/88 MPa | 10 GPa/11000 MPa | 1 %/1.7 % | - | ||
| Somos® PerFORM™ | Stratasys | Acryl | SLA | 68 MPa/80 MPa | 9800 MPa/10500 MPa | 1.1 %/1.2 % | - | ||
| TPU 1301 | EOS | TPU | SLS | 5 MPa/7 MPa | - | 60 %/250 % | - | ||
| HP 3D HR PP | HP | PP | MJF | 29 MPa | 1600 MPa | 13 %/16 % | - | ||
| PA6/66-GF30-FR | Stratasys | PA | FDM | 23.7 MPa/61.1 MPa | 3050 MPa/5830 MPa | 1.1 %/4.6 % | 61.7 MPa/62.3 MPa | ||
| Onyx™ | Markforged | PA | FDM | 37 MPa | 2400 MPa | 25 % | 40 MPa | ||
| Onyx FR™ | Markforged | PA | FDM | 40 MPa | 3000 MPa | 25 % | 41 MPa | ||
| Precise PLA | Markforged | PLA | FDM | 18 MPa | 2399 MPa | 27 % | 31 MPa | ||
| ULTEM™ 9085 | Markforged | PEI | FDM | 76.5 MPa (XZ) | 2500 MPa (XZ) | 5.7 % (XZ) | - | ||
| Vega™ | Markforged | PEKK | FDM | 87.6 MPa (XZ) | 5200 MPa (XZ) | 3 % (XZ) | - | ||
| Ultrasint PP 1400 black | forward AM | PP | SLS | 29 MPa/29 MPa | 1250 MPa/1300 MPa | 25 % | - | ||
| HP 3D HR TPU 01 | HP | TPU | MJF | 7 MPa/9 MPa | - | 137 MPa/291 MPa | - | ||
| Ultrasint® TPU01 | forward AM | TPU | SLS | 7 MPa/9 MPa | 85 MPa | 150 %/280 % | - | ||
| PA 1101 | EOS | PA | SLS | 48 MPa/50 MPa | 1650 MPa | 12 %/30 % | - | ||
| FS8100PPS-GF | Farsoon | PPS | SLS | 55 MPa | 4999 MPa | 1.4 % | - | ||
| PA 2210 FR | EOS | PA | SLS | 0 /46 MPa | 2300 MPa/2500 MPa | 2 %/4 % | - | ||
| Alumide® | EOS | PA | SLS | 48 MPa (XY) | 3800 MPa (XY) | 4 % (X) | - | ||
| FS4100PA | Farsoon | PA | SLS | 49 MPa | 1542 MPa | 58 % | - | ||
| Ultrasint® PP nat 01 | forward AM | PP | SLS | 28 MPa | 1388 MPa | 30 % | - | ||
| PBT Optimal | Sinterit | PBT | SLS | 48.28 MPa/49.04 MPa | 2663 MPa/2718 MPa | 2.56 %/2.62 % | - | ||
| FS6140GF | Farsoon | PA | SLS | 77 MPa | 6585 MPa | 1.7 % | - | ||
| FS3201PA-F | Farsoon | PA | SLS | 44 MPa | 1500 MPa | 35 % | - | ||
| FS3401GB | Farsoon | PA | SLS | 44 MPa | 2644 MPa | 9.3 % | - | ||
| FS3401GB-F | Farsoon | PA | SLS | 47 MPa | 2810 MPa | 8.7 % | - | ||
| FS1088A-TPU | Farsoon | TPU | SLS | 20 MPa | 30 MPa | 340 % | - | ||
| FS3250MF | Farsoon | PA | SLS | 51 MPa | 6130 MPa | 5 % | - | ||
| HT-23 | EOS | PEKK | SLS | 61 MPa/80 MPa | 5800 MPa/6500 MPa | 1.1 %/1.3 % | - |
